Planetary Drive Winch System
The winch is equipped with a 2.5 HP permanent magnet electric motor with a 199:1 planetary gear reduction system. This ensures that your winch will never quit lifting before it reaches the full rated capacity.
Double Boom Design
The double boom design is nearly twice as strong as the nearest competitor.
Gear Bearing Rotation
Uses same rotation system as the larger class cranes. There are no plastic bushings or brass gears in the rotation system. It uses a high strength steel ball bearing turntable gear, a high strength steel worm gear, and a cast steel worm gear housing.
Integral Rotation Stop
400 degrees of rotation with an integrated rotation stop. Integrated stops allow the best performance while protecting wires and hoses from damage.
21' of Reach
Hydraulic 1st stage extension. Manual 2nd stage extension.
Comes standard with a radio remote control.
||38,000 ft-lb (5.25 tm)
|Standard Boom Length
||11' (3.35 m) from CL of Crane
||Hydraulic 60" (152.4 cm)
||Manual 60" (152.4 cm)
|Maximum Horizontal Reach
||21' (6.40 m) from CL of Crane
|Maximum Vertical Lift
||22' 10" (6.96 m) from crane base
||34.41" (87.40 cm)
|Required Mounting Space
||20" x 21" (50.8 x 53.3 cm)
|Approximate Crane Weight
||1,600 lbs (725 kg)
||Radio control standard for all functions
||5/16" (.79 cm)
||-5º to +80º
|Line Pull Speed
||16 ft / min (4.88 m/min)
|Maximum Single Part Line
||3,000 lbs (1360 Kg)
|Maximum Double Part Line
||6,000 lbs (2720 Kg)
||400 degree power (worm gear)
||6,000 lbs @ 6' 4" (2720 Kg @ 1.9 m)
||1,810 lbs @ 21' (820 Kg @ 6.4 m)
||E/H 2.0 gpm @ 2900 psi
|Min. Rec. Chassis (GVWR)
*Subject to change without notification
NOTE: All Stellar cranes meet ANSI B30.5 and OSHA 1910.180 specifications.