Inventory | Fuel/Lube Truck
2000 Fuel/Lube
Built for demanding field service operations, this heavy duty, California CARB compliant lube service body features a durable platform design, integrated fluid storage, and professional dispensing systems. Designed for fleet maintenance, construction, mining, agriculture, and equipment service applications, it is equipped to handle multiple fluids from one efficient service unit.
2026 Kenworth T880 - 2000 Fuel/Lube (WR256)
2027 Kenworth T880 – CARB compliance
- Tandem Axle Chassis
- 232″ Wheelbase
- 156″ Cab-to-Axle (CA)
- 66,000 lb. GVWR
- White Exterior
- Cruise Control
- Air Conditioning
- Heater
- Fast Idle Control
- AM/FM Radio
- Safety Kit
- Front & Rear Leaf Spring Suspension
- Air Brakes
- Front & Rear Shock Absorbers
- 425/65R22.5 Front Tires
- 11R22.5 Rear Tires
- Engine: CARB low-NOx MX-13 configuration
- MX-13 Ratings: 455 / 510 hp
- CARB MX-13
- 12.9 Liters
- Inline 6-Cylinder
- 130 mm × 162 mm Bore/Stroke
- 2,200-rpm Governed Speed
- 42 U.S. qt Oil Capacity
- 455 hp / 1,650 lb-ft
- 510 hp / 1,850 lb-ft
NOx emissions
- The CARB MX-13 Is Specifically Designed To Satisfy California’s Low-NOx Requirements
- Twin-Canister SCR
- Optimized Calibration And Hardware For Emissions Controls
- Higher Demanding Emissions DEF System
- Designed To Maintain Good Fuel Economy Regardless of Additional Emissions Hardware
PACCAR specific
- Compact Twin Catalyst Canister SCR Design
- 48-V Aftertreatment Electric Heater
- Revised Emissions Controls
- Improved NOx Sensor Durability
- CARB-Specific Calibration/Control Strategy
Body Features
- Heavy-Duty Steel Platform Body
- 108″ × 96″ Service Deck
- 18″ Drop Deck Reel Platform
- Reinforced Steel Construction
- Full-Width Structural Crossmembers
- Tubular Side Rails
- Heavy-Duty Body Mounting System
- Aluminum Tread Plate Storage Cabinets
- Weather-Sealed Compartment Doors
- Used Filter Storage Cabinet
- Enclosed Hose Reel Cabinet
- Integrated LED Compartment Lighting
Fluid Storage System
- 2,000-Gallon Diesel Fuel Tank
- Double-Bottom Fuel Tank Construction
- Rollover Protection
- Top-Fill Fuel System
- Integrated Fuel Tank Catwalk
- (4) 100-Gallon New Oil Tanks
- 250-Gallon Used Oil Tank
- 55-Gallon Antifreeze Tank
- 55-Gallon DEF Tank
- Drum Storage Kit
Hydraulic System
- PTO-Driven Hydraulic Piston Pump
- Load-Sensing Hydraulic System
- Hydraulic Filtration System
- Hydraulic Oil Cooler
- Adjustable Hydraulic Valve Bank
Fuel Dispensing System
- Hydraulic-Driven Diesel Fuel Pump
- Roper Fuel Pump
- Digital Flow Meter
- 70′ Electric Rewind Fuel Hose Reel
- Automatic Fuel Nozzle
Fluid Dispensing Systems
- Complete Engine Oil Dispensing System
- Used Oil Recovery System
- Grease Dispensing System
- Antifreeze Dispensing System
- DEF Dispensing System
- Graco Pumps Throughout
- Hannay Hose Reels
- Professional Dispensing Valves
Air System
- 40 CFM Hydraulic Air Compressor
- Air Receiver Tank
- Air Regulator
- Air Lubricator
- 50′ Air Hose Reel
Lighting
- LED Work Lights
- LED Compartment Lighting
- Rear Amber Warning Beacons
Safety Features
- Backup Alarm
- Grease Drum Heater
- Spill Containment Kit
- Fire Extinguisher
- Access Ladder
- Grab Handles
- 108″ L x 96″ W Steel Floor
- Oil Resistant Non-Slip Flooring
- Formed Steel Cross Members
- Tubular Steel Side Rails Integral Platform Floor
- Full Length Aluminum Side Walls
- Lockable Access Door Each Side Of Unit
Prop Deck Platform
- All Welded Rectangular Steel Construction Reinforced To Chassis Frame Rail
- Integrated Rectangular Steel Tubing Bumper
Body Mounting
- Heavy Duty Spring Loaded “H” Bracket Design
- Twin Block Fixed Position Tie-Downs
- Rubber Composite Sill Between Chassis Frame Rail And Body Long Sills
Reel Cabinet – Hose Assembly
- Formed Steel Construction With Integral Drip Edge
- Heavy Duty, Multi-Level, Sloped Bottom Drip Tray, And Drain Plug
- Aluminum, Flip-Up Style Door With Gas Charged Assist Springs, Stainless Steel Hinges
- Multi-Point Latch, And Weather-Seal
- LED Strip Lights Installed Hose Reel Area
Fuel Tank
- Tank Is Built To DOT-406 Specifications
- Design Including Full Length Doubted Bottom
- Full Length Reinforced Steel Sills
- Top Of The Tank Catwalk
- Top Mounted Man-walk
- Steel Access Ladder
Product Tanks
- (1) 250 Gallon Used Oil Tank
- (4) 100 Gallon Oil Tanks
- (1) 90 Gallon Anti-Freeze Tank – Poly Construction
- (1) 90 Gallon “DEF’ Tank – Poly Construction
- (1) 90 Gallon Fresh Water – Poly Construction
- (1) Drum Rest And Hold-Down Kit For A 400 lb. Commercial Drum
- Large Radius Formed Corners To Reduce Stress
- Double Walled Tank
- High Strength Alloy Formed Steel For Petroleum Products
- Poly Construction With Steel Frame For Anti-Freeze
- 4″ Nominal Diameter, Non-Vented W/ Lockable Fill Lid
- 10-Micron Atmospheric Vent On Oil Tanks
- 3 Liquid Level Sight Eyes On Each Tank
Storage Cabinets
- Automotive Weather-Sealed
- (3) General Storage Units
- (1) Used Filter Cabinet With Raised Screen Floor And Bottom Drain Plumbed Into Used Oil System
- (4) Slide Out Tool Drawer Unit Installed In Above Cabinet
Hydraulic System
- Open Loop, Closed Center
- Load Sense Hydraulic System
- Heavy Duty Pressure/Flow Compensated Piston Pump
- Transmission Mounted Power Take-Off (Air Or Electric Shift)
- Return Line Filter With Indicator Gauge
- Heat Exchanger With Electric Fan
- Master Valve Bank
- Provisions For Adjusting Pressure On Each System
- On / Off Switches Included For Each Oil System
Air Supply System
- Hydraulic Driven 40P Piston Compressor (40 CFM)
- Hannay Spring Rewind Hose Reel With 50′ Of 1/2″ Air Hose
- ASME Certified Air Receiver With Air Filter, Lubricator, And Regulators
Oil System
- Hydraulic Driven, Oil Pump/Motor Combination
- Hannay Spring Rewind Hose Reel With 50′ Of 1/2″ Oil Hose
- Graco Volume Dispense Valve
Used Oil System
- Air Operated 1.50″ Graco Diaphragm Pump
- 4-Way Valve Allows Suction And Discharge From The On-Board Tank
- (1) “Y’ Type Suction Strainer
- The Used Cabinet Drain Port Is Plumbed Into The Used Oil System
- Hannay 30′ Rewind Hose Reel
Anti-Freeze System
- Air Operated 1″ Diaphragm Pump
- Hannay Spring Rewind Hose Reel With 50′ Of 1/2″ Hose
- Graco 200 Series Dispense Valve
Diesel Fuel System
- Hydraulic Driven Blackmer TXD2 Fuel Pump
- Fuel Filter Assembly Sized To Meet The Output Flow Of The Pump
- 150″ Flow Meter With Register, Totalizer, And Air Eliminator
- Hannay Electric Rewind Reel w/50′ Of 1.25″
- Hannay Electric Rewind Reel w/50′
- Automatic Nozzle
Grease System
- Air Operated (75:1) Ratio Graco Pump
- Hannay Electric Rewind Hose Reel With 50′ of 3/8″ Hose
- Graco High Pressure Dispense Valve
Fresh Water System
- Gravity Drain 1/2″ Hose x 6′ Bulkhead Ball Valve
DEF System
- Air Operated Diaphragm (Compatible With OEF Fluid)
- Air Regulator With On/Off Valve Releases Stored Air To Pump When Not In Use
- Hannay Rewind Hose Reel With 50′ Of 1/2″ OEF Hose
- Automatic Shut-Off DEF Nozzle And Swivel
12 V DC Electrical System
- LED Clearance Lights Conforming To FMVSS 108
- (6) LED Flood Lights
- (2) Amber Beacons Located At The Rear
- Back-Up Alarm
Grease Heat
- 110V AC Grease Drum Heat Blanket, Power Inverter, And Outlet Near Drum
Miscellaneous
- Side Access Ladder
- 20 lbs Type ABC Fire Extinguisher
- (4) Each, Adhesive Placards – Shipped Loose
- EMW5501 Environmental Spill Kit
- Passenger Side Block Holder For (2) Wheel Chocks
Finish Coating
- All Surfaces Are Cleaned And Chemically Washed
- Body Components Are Primed Using PPG Epoxy Primer
- Body Components Are Finish Painted Using 2 Coats Of PPG Baked On Acrylic
- Under Compartments Are Under Coated
Availability
| SO# | Unit | Chassis | Availability | Note |
|---|---|---|---|---|
| 6567 | WR TA FL 2000 Fuel/Lube | 2026 Kenworth T880 | California CARB compliant chassis |