Inventory | Mechanic Trucks

Distributor Stock: 2024 Ford F550 w/TMAX1-11/8630/40P (DS117)

Call For Price

CONTACT

RUNNION EQUIPMENT COMPANY
Joe Nikischer
800-824-6704
Please Note: Stellar does not own or have possession of dealer stock equipment shown.

Unit number – 5268N

2024 Ford F550 w/TMAX1-11/8630 Details:

2024 Ford F550 Super Cab 4×4

  • 19,500# GVWR
  • 6.7L Power Stroke V8 diesel engine
  • TorqShift 10-speed automatic transmission
  • Engine block heater
  • Cruise control
  • Air conditioning
  • Power group
  • AM/FM radio with wireless audio streaming
  • Backup camera

Stellar TMAX1-11 Aluminum Mechanic Body

  • Aluminum doors and side packs
  • Torsion box understructure with isolated, steel crane compartment
  • Master-Lock system
  • 133” long
  • Six (6) recessed cargo tie-downs
  • Two (2) rear mounted grab handles
  • 12” fold down tailgate – painted black
  • 21” work bench bumper with thru compartment
  • Vise mounting plate – receiver workbench mount
  • Step, slide out for TMAX mechanics work bench bumper
  • Rubber fenderettes
  • All compartments raised to 52” H x 22” D
  • Overlapped doors on SS1V/CS1V and horizontal compartments
  • 2 & 3 point stainless steel compression latches
  • Stainless steel “Billet Style” hinges
  • Spring loaded door stops
  • Dual-seal automotive type compartment weather seal
  • LED compartment lights
  • SS1VF – Heavy duty aluminum drawer set – 35.5” H x 34” W x 18” D – 3-3”, 3-5”, 1-7”
  • SS1VR – Three (3) shelves with (3) dividers
  • SS Horizontal – Heavy duty aluminum drawer set
  • SS Rear – Three (3) shelves with (3) dividers
  • CS1V – Divider kit with shelves and 8” drop well. Oxy-Acetylene bottle holder holds 2 bottles. Oxy-acetylene twin hose reel with 50’ twin hose
  • CS2V – Three (3) shelves with (3) dividers
  • CS Horizontal – Shelf with 3 dividers
  • CS Rear – ½” x 50’ hose reel with roller guide – exits rear of body
  • Stellar 40P hydraulic driver compressor – produces 40 CFM at 100 psi, 2-cylinder, single stage compressor, direct drive coupling, and hydraulic motor
  • 25-gallon air tank kit (1 10-gallon, 1 15-gallon)
  • FLR system – (filter, lubricator, regulator)
  • 20-gallon hydraulic reservoir – bulkhead mounted
  • LED floodlights – Four (4) total, 1 on boom support, 1 SS behind compressor, 1 on each rear taillight box
  • Backup alarm
  • ICC safety kit – 2.5# fire extinguisher and reflector kit
  • Weld-on receiver hitch
  • Spray-on bed liner for load bed walls and floors, and workbench
  • Undercoated
  • Prime painted white

Stellar 8630 telescopic crane

  • 53,100 ft/lb rated when in boost mode
  • 8,600# maximum capacity at 5’10’ radius
  • 30’ maximum hydraulic reach
  • Boom elevation: -10° to +80°
  • 400° non-continuous rotation – durable enclosed rotation system with a cast iron base and an internal mechanical stop
  • Planetary winch with 100’ of 3/8” wire rope
  • Max line pull speed 60ft/min
  • Quick release snatch block stow
  • Adjustable boom support, roller rest
  • Proportional radio remote control – LCD features real time load capacity, maximum distance with the current load, boom angle, and percentage of load
  • CDTpro Control System. The most advanced crane remote ever. Save time by knowing your crane can lift the load before you set up. The innovative, industry-only Range Finder technology provides real-time max lifting capacity from any point around the crane
  • On-Demand speed control ramps engine RPM up only when the crane is being used. When crane is not used for 5 seconds engine RPM returns to idle. This lowers fuel consumption and reduces noise pollution in the work area
  • Greasable pivot bushings, each pivot pin location includes bushings and grease zerks to provide for years of use
  • Hydraulic stabilizers
Summer Sales event gif with moving stars

Lowest Work Truck Prices Of The Season

Find Your Deal