SI-60 Cable Hoist Truck

60,000-lb Capacity

Handle tough hauling jobs with the Stellar® SI-60 Cable Hoist Truck. It has the power and smooth performance to maximize productivity on a daily basis, and the 60,000-lb hoist rated capacity gives you plenty of flexibility.

  • Reeving Cylinder Enclosure to reduce exposure to damaging debris.
  • Dump Cylinder Mounting above and outside of the frame rails for easier access and stability during dumping.
  • Durable Construction includes zinc-plated steel pins in the rear hinge, sheaves and cylinders, plus 1/2″ high-strength wear plates at the end of the main frame tubes.
  • Cable Routed in the single direction of rotation.
  • Container Lock is automatic spring loaded.
  • Gear-Type Hydraulic Pump for 35 gpm and low pressure.
  • Counterbalance Valves prevent cylinder movement in case of pressure loss.
  • Protective Coating featuring two-part polyurethane automotive finish paint for added protection against scratches and debris.
  • Easy Maintenance thanks to greaseable bushings with zerks at all pivot points.


  • 36 months structural
  • 12 months parts and labor
Hoist Rated Capacity: 60,000 lbs
Main Frame: 8" x 4" x 1/2" A500 C tubing
Subframe: 4" x 2" x 1/4" A500 C tubing
Front Stop: 1-1/2" plate
Container Lock: Automatic spring-loaded
Lift Cylinder Shaft: 2-1/2" plate
Rear Hinge Shaft: 3" solid steel
Cable: 7/8" (6 x 37 EXIWRC)
Cable Sheaves: 10" O.D. bronze-brushed sheave
Cable Anchor: 4 cable clamps
Cable End: Steel casting
Rear Hold Down: 1" plate located for standard containers
Middle Hold Down: 3/4" plate
Lift Cylinders: 6" x 72" D.A.
Reeving Cylinder: 7" x 80" D.A.
Direct Mount Pump: Gear type 35 gpm @ 1,500 rpm
Operating Pressure: 1,850 psi
Hydraulic Valve: 2-spool 45 gpm safety bypass
Hydraulic Reservoir: 60-gal 25-micron filter and screen filter
Outside Rollers: 4" O.D. with bronze bearing
Inside Rollers: 6" O.D. hardened roller and pins
Working Points: Greaseable
Safety Stand: Factory-installed
I.C.C. Bumper: Folding, mounting lugs factory-installed
Rear Bumper: Pre-drilled bolt mount — sealed beam backup, clearance and tail lights
Rear Flange Roller: 8" O.D. hardened with 2-1/2" c-1045
Rear Center Sheave: 8" O.D. hardened
Hoist Up: 30 sec. approx.
Hoist Down: 15 sec. approx.
Cable In: 46 sec. approx
Cable Out: 37 sec. approx.
Container Length: 18' – 22'
Approximate Weight: 6,100 lbs
Lift Cylinder — T Models: 6" x 72" (5.5" x 4.5" x 3.5" x 125") Telescopic Cylinders
Inside Controls: Direct connect, cable or pneumatic
Remote-Mount Hydraulic Pump: Gear type 35 gpm @ 1,500 rpm
Auxiliary Fold-Down Front Stops: For short containers
Full Fenders: Tandem or tri-axle, 12-gauge steel or poly
Tarp Rack/Toolbox Combination: 20" x 16" x 48"
Drop-In Stops: For short containers
Also available:
Hoist-up alarm
Cab guard
4-spool valve
Boxed-beam double-shear lift cylinder with replaceable stub pins and cross tube for hose routing
PTO air operated with signal light
• Single-acting hydraulic line to rear*
• Double-acting hydraulic line to rear*
• Double-acting hydraulic line to side*
*Requires the 3-spool valve option or selector valve.

Ready to Get the Job Done?

Reach out to us today. With Stellar, you don’t just get tough, reliable products and equipment. You get real solutions to real problems — designed with you in mind.