TMAX 1-11 Aluminum

• F600
• 6.7L Diesel Engine
• 4×4
• 10-Speed Automatic Transmission

Body Features

• Aluminum Side Packs
• Aluminum Doors
• Isolated Steel Crane Compartment And Torsion Box Understructure
• All Compartments Raised To 52″
• 8″ Drop Well In CS1V for Oxy /Acet Bottles
• 21″ Work Bench Bumper With Thru Compartment
• Flush Front Bulkhead
• Exterior DOT Light Package
• Master-Lock System
• 22″D X 52″H Side Packs
• 133″ Long
• (6) Recessed Cargo Tie-Downs
• Dual-Seal Automotive Type Compartment Weather Seal
• Rubber Fenderettes
• Overlapped Doors On SS1V / CS1V And Horizontal Compartments
• 2 & 3-Point Stainless Steel Compression Latches
• Stainless Steel Hinges
• Spring Loaded Door Stops
• Weld On Receiver Hitch
• Prime Painted
• Undercoated

Additional TMAX Information

Compartment Storage

• Streetside 1st Vertical In front Of The Divider:
  • Heavy Duty Aluminum Bale Style Pull Handle Drawer Set, 35.5″H x 31″W x 18″D, 3-3″, 3-5″, 1-7″ w/LightBar
• Streetside 1st Vertical To The Rear Of The Divider:
  • Strut Mounted Shelf With (3) Dividers 18.50″W x 19.00″D
• Streetside Horizontal
  • Heavy Duty Aluminum Bale Style Pull Handle Drawer Set, 13.5″H x 48″W x 18″D, 3-3″ w/LightBar
• Streetside Rear
  • Strut Mounted Shelf With (3) Dividers 23.38″W x 19.00″D
• Curbside 1st Vertical
  • Divider Kit With Strut Mounted Shelves 19.00 Wide
  • Strut Mounted Oxy-Acet Bottle Holder – 2 Bottle Holder
• Curbside 2nd Vertical
  • Strut Mounted Shelf With (3) Dividers 20.38″W x 19.00″D
• Curbside Horizontal
  • Strut Mounted Shelf With (3) Dividers 52.00″W x 19.00″D
• Curbside Rear
  • 1/2″ x 50′ Hose Reel With Roller Guide – Exits Rear Of Body

Body Mounted Options

• Rock guard kit – Adhesive Black
• Black Grab Handle – Mounts To Rear Side Pack And Bumper
• One Pair Stellar Mud Flaps With Mounting Bolts
• TMAX Aluminum Tailgate – 12″ Tall, Painted Black
• Adjustable Boom Support
• Roller Rest, Painted Black

Bumper Mounted Options

• Vise Mounting Plate – Receiver Work Bench Mount
• Step, Slide Out For TMAX Mechanics Work Bench Bumper
• Stabilizer Assembly – Hydraulic Out/Hydraulic Down, Painted Black

Light Options

• LED Flood Light Kit – 4 Lights – (1 Near Boom Support, 1 SS Behind Compressor, 1 On Each Rear Taillight Box)
• LED Compartment Light Kit
• Rear Taillights Equipped With Integrated Strobe Lights, License Plate Bracket, ID Light Bar, Reflectors, And One Flood Light Mounted On Top Of Each Box

 Safety Options

• Cover Plate For Backup Camera

Electrical Options

• Truck Upfitter Switches Control Package

Hydraulic Options

• Hydraulic Reservoir, 20-Gallon, Bulkhead Mounted, Painted Black

Paint & Finish

• Paint 9’-12’ Body Stellar White Paint
• Spray On Bed Liner For Load Bed Walls And Floor – Black
• Spray On Bed Liner For Work Bench Bumper – Black

• Crane Rating : 53,100 ft-lb
• Max Lifting Capacity: 8,600 lbs @ 6′ 2″
• Maximum Horizontal Reach: 29′ 8″ From CL Of Crane
• Maximum Vertical Lift: 31′ 6″ From Crane Base
• Boom Elevation: -10° to +80°
• CDTpro™ Control System w/Range Finder
• Additional Product Information

• Output Capacity: 40 cfm @ 100 psi
• Max. Pressure: 150 psi
• Cylinders: 2-Cylinder, Single-Stage
• Electrical Control: 12 VDC @ 20 amps
• 25-Gallon Air Tank Kit (1 -10-Gallon, 1-15-Gallon)
• FLR System Installed – 1 Outlet For Air Hose (Filter, Lubricator, Regulator)
• Additional Product Information