Hooklift
Stellar NXT52 double pivot 52,000 lb capacity hooklift hoist
with Z-rail base, telescopic jib, manual adjustable
54″/61.75” hook height, (4) roller style body saddles,
bolt-on outside latches, dual rear rollers and 52° dump
angle; Designed for 16’ to 22’ container body lengths,
shortest container body length for dumping is 16’, longest
flatbed body (w/fold down bumper) is 24’ (Dump angle is
restricted due to body length); Maximum 24 GPM hydraulic flow
with hydraulic operating pressure of 4,500 PSI; Shipping
weight of 6,015 lb; Chassis requirements: For configuration
setup to handle 16ft – 20ft containers, the minimum CT is
174” CA without tarper and 186” with tarper, for
configuration setup to handle 16ft – 22ft containers, the
minimum CT is 182” CA without tarper and 194” with tarper,
minimum after frame of 59” and a minimum GVWR of 54,000 lb.
Installed
Includes:
129059 JIB ASM NXT52 54/62HH MANUAL
129351 SECONDARY ASM NXT52
128940 DUMP ASM NXT52 DROLLERS
129228 BASE ASM NXT52
129440 MNT KIT NXT52
130144 RSRVR ASM 25GAL SQUARE
Standard Zinc Pins
Standard Black Paint
Hydraulics
2-Function air control. Includes: 2-Function air tower,
2-section valve bank assembly, valve bank mounting and hoist
up indicator light. – Installed
Hot shift PTO for various chassis with Allison 4000
transmission, 123%, 7/8″-13T Spline Shaft. – Installed
Hydraulic direct mount bent axial piston pump, 3.84 CID with
7/8″-13T spline shaft, bi-rotational. Includes hydraulic
fitting kit. – Installed
Accessories
Bumper, reinforced to accept pintle hitch 90K. (pintle not
included).
Poly fenders for tandem axle with mounting brackets-INSTALL
One pair Stellar mud flaps with mounting bolts (Included in
factory installation) – Installed
ICC safety kit consisting of rechargeable 2.5# fire
extinguisher and reflector kit – Installed
Tarper
Pioneer RP4500SARG Rack ‘N Pinion® Roll-Off Tarp System with
Telescopic Gantry for Tandem Axle Chassis Hooklift
Applications, Up to 24’ Long Containers, Gantry Raises 5’ to
7’-6”, Hydraulic Driven with Flow Diverter and Control Valve,
Telescoping Arms and Gear Assembly with External Cylinders
and 36” of Stroke, Spring Loaded Roller Assembly Mounted to
Gantry, Quick Tarp Attachment, Offset Stabilizer Bar, Heavy
Duty Mesh Tarp.
