2025 Kenworth T280 w/TMAX 2-11 Aluminum/12621/46P (WR28)

2025 Kenworth T280

• 88″ CA/156″ WB
• 26,000# GVW
• Paccar PX-7 300 HP Diesel
• Allison 2500
• 10,000# Front Axle
• 21,000# Rear Axle
• Horiz. Exhaust With Vertical Pipe
• Air Brakes
• 56-Gallon LH Fuel Tank
• 11R22.5 Tires
• Air Cond.
• Air Cushion Driver’s Seat

TMAX 2-11 Mechanic Aluminum Body

• Aluminum Side Packs
• Aluminum Doors
• Steel Crane Compartment
• All Compartments Raised to 60″
• Flush Front Bulkhead
• Torsion Box Understructure With Isolated Crane Compartment
• Master-Lock System
• Exterior LED DOT Light Package
• 22″D X 60″H Side Packs 133″ Long
• 21″ Work Bench Bumper With Thru Compartment
• Six (6) Recessed Cargo Tie-Downs
• Two (2) Rear Mounted Grab Handles
• Dual-Seal Automotive Type Compartment Weather Seal
• Rubber Fenderettes
• Overlapped Doors On SS1V, CS1V
• Overlapped Doors On Horizontal Compartments
• 12″Fold Down Aluminum Tailgate (Painted Black)
• 2 & 3-Point Stainless Steel Compression Latches
• Stainless Steel “Billet Style” Hinges
• Spring Loaded Doorstops
• Pintle Hitch Mount

Air Options

• 22-Gallon Air Tank With Fittings, Hose Kit, Mounting Brackets, Painted Black
• FLR System – 1 Outlet For Air Hose (Filter, Lubricator, Regulator)

Hydraulic Options

• Hydraulic Reservoir
• 35-Gallon
• Bulkhead Mounted
• Painted Black

SS1VF

• Heavy Duty Aluminum Drawer Set
• 43″H x 34″W x 18″D, 8-3″, 2-5″, 1-7″ (Incl. 2.5″ Riser)
  Drawer Light Bar
• Left Hand Wire Harness

SS1VR

• Shelf With (3) Dividers 17.63″W x 19.00″D

SS Horizontal

• Heavy Duty Aluminum Drawer Set
• 11″H x 48″W x 18″D, 3-3″ (incl. 2.5″ Riser)
• Drawer Light Bar
• Left Hand Wire Harness (SS Horizontal)

SS Rear

• Shelf With (3) Dividers 24.38″W x 19.00″D

CS1V

• Divider Kit With Shelves 19.00 Wide For Oxy/Acet In Curb Side 52″ And 60″ Compartments

CS2V

• Shelf With (3) Dividers 21″W x 19.00″D

CS Horizontal

• Shelf With (3) Dividers 52.44″W x 19.00″D

CS Rear

• 1/2″ x 50′ Hose Reel With Roller Guide – Exits Rear Of Body

Body Mounted Options

• Rock Guard Kit – Adhesive Black
• Grab Handle – Mounts To Rear Side Pack And Bumper
• One Pair Stellar Mud Flaps
• TMAX Aluminum Tailgate – 12″ Tall, Painted black
• Adjustable Boom Support
• Roller Rest, Painted black

Bumper Mounted Options

• Vise Mounting Plate – Receiver Work Bench Mount
• Step, Slide Out For TMAX Mechanics Work Bench Bumper
• Rear Stabilizer Up To 92,000 ft-lbs
• Hydraulic Out/Hydraulic Down, Painted Black

Light Options

• LED Flood Light Kit – 4 Lights – (1 Near Boom Support, 1 SS Behind Compressor, 1 On Each Rear Taillight Box)
• LED Compartment Light Kit

Safety Options

• Chassis Mounted Back Up Alarm – 107 Db
• ICC Safety Kit Consisting Of Rechargeable 2.5# Fire Extinguisher And Reflector Kit

Chassis Options

• Leaf Springs, Installed On Crane Side Of Chassis

Electrical Options

• Program Speed Control For Cummins Engine
• Truck Upfitter Switches Control Package

PTO/Pump Options

• Generic Hot Shift PTO
• Hydraulic Pump
• Tandem Section For Crane And Compressor

Paint & Finish

• Paint 9’-12’ Body Stellar White Paint Axalta Paint Code 350407EX
• Spray On Bed Liner For Load Bed Walls And Floor – Black
• Spray On Bed Liner For Work Bench Bumper – Black

12621 Hydraulic Service Crane

• 77,800 ft/lb Rated
• 12,000 lb. Maximum Capacity
• 21′ Full Hydraulic Reach
• CDTpro™ Equipped
• Proportional Radio Remote Control
• Additional Product Information

46P Air Compressor

• 46 CFM @ 175 PSI
• 4 Cylinder 2 Stage Compressor
• Direct Drive Coupling
• Oil Cooler, Fan, And Hydraulic Motor
• Includes Steel Base, Enclosure, And A Flip Up Lid
• Dimensions: 34.5”L x 26”W x 29.5”H.
• Additional Product Information